Ceramic coatings protect your car from the elements, minimising damage and keeping your paintwork looking great. They also make cleaning your car easier, with water and dirt beading off the surface rather than sticking to it.

Please note – Ceramic Coatings do NOT make your paint scratch-resistant! You still need to be careful washing and polishing your car. For quality scratch resistant paint protection Adelaide, check this out.

9H

Unlike waxes and sealants, which require frequent reapplication, ceramic paint protection will provide your car with a glossy, unyielding protection that’ll last for years and protect the paintwork from damage. Our ceramic coatings block out harmful UV rays and provide a shield that prevents chemical staining from rain and exhaust fumes.

Our scratch-resistant paint protection Adelaide in the 9H range is an advanced ceramic coating product that is ultra-hard and super hydrophobic. This advanced formula by Always Dry forms a strong chemical bond with the paint’s molecular structure and becomes a permanent part of the vehicle’s surface. The result is a durable, ultra-thin, 4-5 micron thick coating with incredible durability and a fantastic water-beading effect.

A five-year manufacturer’s warranty backs this professional-grade Coating and does an excellent job of minimising the risk of paintwork swirls and scratches from washing and maintenance.

10H

Several coatings are available on the market, and choosing the right one for your vehicle requires some consideration. Our in-house Adelaide-based automotive specialists will help you select the paint protection best suited to your vehicle and budget. For quality scratch resistant paint protection Adelaide, check this out.

When applied, ceramic coatings are transparent liquid nano-ceramics that transform your factory paint into a permanent, durable, glossy shield. It will protect your car from environmental fallout, including bird droppings, decomposing insects and tree sap that can permanently damage the paint’s surface.

It also repels water, dirt, and grime, making washing your vehicle much easier as the dirt rolls off with the water rather than adhering to the surface. New cars must keep them looking brand-new, boosting trade-in value when upgrading your ride. The hardiness of this ceramic is rated at 10H on the pencil hardness scale.

15H

In the 15H range, you’ll find ceramic coatings that are the pinnacle of durability. These coatings protect against the harshest chemicals, harsh weather conditions and even acid rain. They also provide a protective barrier to prevent water spots and repel contaminants like dirt, dust and bird droppings.

Ceramic car protection Adelaide provides a transparent, liquid nano-ceramic layer applied to the paint. This layer protects against UV rays, contaminants and bird droppings while protecting the body from scratching and surface corrosion. It also gives the vehicle a stunning shine and self-cleaning properties. For quality scratch resistant paint protection Adelaide, check this out.

At Next Level Detailing, we use Gtechniq’s ceramic coating products because of a lifetime warranty and proven long-lasting back. Our team of expert technicians can help you decide which ceramic Coating would be best for your vehicle and how to maintain it properly for maximum longevity. Call us today to schedule an appointment!

20H

The 20H range of Ceramic Coatings is at the pinnacle of durability. They have passed rigorous independent testing and can only be applied by approved applicators. These premium coatings protect your vehicle from environmental fallout such as tar, decomposing insects, bird droppings and tree sap. They also provide an incredible shine and are self-cleaning.

Adelaide Paint Protection is an accredited dealer of GTECHNIQ products and a proud member of the GTECHNIQ Professional Detailer network. Our in-house team of automotive specialists are happy to advise which product is best suited to your vehicle.

Ceramic Coating is an invisible shield protecting your factory paintwork from UV damage, acid rain and road debris. It also enhances the gloss of your paintwork whilst adding a silky smooth finish. Its super hydrophobic properties make washing your car a breeze as liquids simply bead up and roll off the surface. Tint City offers a full range of ceramic coatings for your exterior and interior, including the new car and 4WD ceramic clear coat.

Advanced torque tuning for vehicles is an effective technique that can enhance your car’s fuel economy, speed and overall stability. Additionally, it increases its power output.

Torque is measured in foot-pounds of force per revolution at an engine RPM. Volumetric efficiency is maximised at its maximum torque point while horsepower decreases due to breathing restrictions caused by intake port size and camshaft timing.

Improved Fuel Efficiency

Advanced torque tuning Adelaide can improve fuel economy, regardless of your car’s model or year. It is done by remapping the original parameters in your engine’s ECU or ECM to make it run more efficiently.

By decreasing throttle response when accelerating, adjusting the torque converter early to deliver power more effectively to the rear wheels, and optimising cylinder deactivation when there is a lockup in the torque converter, you can improve your vehicle’s fuel economy without sacrificing horsepower or torque.

Advanced torque tuning Adelaide can also enhance fuel efficiency by altering the ignition timing of your car’s spark plugs. This modification results in more efficient combustion of your vehicle’s fuel, leading to improved performance and reduced emissions.

In addition to remapping the original parameters of an engine’s ECU or ECM, many of these chips also enable advanced sensors that monitor water and oil temperatures. It helps you get better fuel economy by allowing your vehicle to run at cooler temperatures than it would typically.

One of the most significant ways advanced torque tuning can improve fuel efficiency is by decreasing your vehicle’s idle speed. It could save up to 10% in costs for fleet work, mainly if your car is used frequently.

Other ways to boost your vehicle’s fuel efficiency include changing the air-fuel ratio in its cylinders. It will lead to more powerful combustion of your fuel, improving performance and reducing emissions.

Finally, you can adjust the ignition timing of your vehicle’s sparks to extend engine cylinder burn time and boost horsepower and torque without compromising engine health or performance.

Torque control is an integral component of fuel economy management systems. It can optimise your vehicle’s performance in various situations and environments.

There are various ways to reduce engine RPM, such as altering airflow through the induction system and adding more fuel during acceleration. Some changes may be subtle, while others require more significant adjustments.

Another way to reduce engine RPM is by altering spark timing. It is typically accomplished by adjusting the breaker advance; a higher breaker advance produces more torque, while a lower one produces less.

Tuning the timing of spark plugs can improve fuel efficiency by increasing the amount of energy converted to electricity. It is done by altering both the type and gap between them.

The added power from turbocharging your vehicle can be highly advantageous, making the car more responsive and enjoyable to drive. Furthermore, it reduces emissions and extends the engine’s lifespan.

Many manufacturers employ a variety of tools to regulate the amount of torque an engine can generate. It includes sensors that measure the force applied by the machine on its wheels.

These sensors can then be employed to regulate fuel flow through an engine. Again, the changes can range from dramatic to subtle, depending on which manufacturer you select.

Vehicles with turbochargers offer even more options since they increase fuel delivery during acceleration.

Furthermore, some high-performance vehicles feature fuel curves that adjust delivery timing based on engine speed. It is especially true for race engines equipped with mechanical fuel injection.

Fuel curves are typically tailored for an engine’s torque and horsepower peaks due to differences in air mass flow.

Increased Stability

Advanced torque tuning offers several critical benefits for drivers. A larger cylinder capacity, for instance, permits higher RPM and faster acceleration while at the same time increasing fuel efficiency – an ideal combination for eco-conscious motorists.

However, increased power can also decrease stability through body roll and vibration. A combination of stiffer springs and anti-roll bars can help combat these issues. A well-tuned chassis also removes some of the stings from oversteer and understeer, reducing strain on your engine and transmission.

As such, engine quality is critical in creating an enjoyable driving experience. Fortunately, we have everything needed to guarantee your car runs as intended by its manufacturer. We offer impressive performance upgrades and maintenance services to keep your vehicle in top condition.